Tac 50-04 Rescue

You are not logged in. [Log In] Home Forums Technical Questions Tac 50-04 Rescue

0 registered members (), 20 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#31418 - 07/16/21 04:22 PM Tac 50-04 Rescue
Joined: Apr 2017 Posts: 96 UpandDown2321 journeyman
UpandDown2321 journeyman Joined: Apr 2017 Posts: 96	I have a 50-04 32 bit MRL that is showing rescue operation and cannot be cleared. The error log loops 1114 1907. Incoming power reads good as well as reverse phase. Figuring to start by changing IOC? My print doesn't show rescue circutry but the switch operates from IOC. Is that a direct swap? Last edited by UpandDown2321; 07/16/21 04:35 PM.

#31451 - 07/20/21 11:22 AM Re: Tac 50-04 Rescue [Re: UpandDown2321]
Joined: Apr 2017 Posts: 96 UpandDown2321 journeyman
UpandDown2321 journeyman Joined: Apr 2017 Posts: 96	Changing IOC had no effect. Car still acts as if its in manual rescue mode

#31459 - 07/21/21 08:11 PM Re: Tac 50-04 Rescue [Re: UpandDown2321]
Joined: Dec 2015 Posts: 1,538 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,538 Local 18	What is J16 set to? Should be 19

#31460 - 07/21/21 09:03 PM Re: Tac 50-04 Rescue [Re: UpandDown2321]
Joined: Apr 2017 Posts: 96 UpandDown2321 journeyman
UpandDown2321 journeyman Joined: Apr 2017 Posts: 96	I ended up finding that later on. Not sure why that would have changed but it cleared up after that. I thought IOC was no good when no inputs would update. Thanks for reply

#31461 - 07/21/21 09:40 PM Re: Tac 50-04 Rescue [Re: UpandDown2321]
Joined: Dec 2015 Posts: 1,538 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,538 Local 18	It happens sometimes. Manifests differently depending on what it changed to.

Photo Gallery