Who's Online Now
0 registered members (), 24 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,656
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#31571 - 08/16/21 06:16 PM Smartrise Run issue  
Joined: Jun 2018
Posts: 102
ElevatorGuy128 Offline
member
ElevatorGuy128  Offline
member

Joined: Jun 2018
Posts: 102
We recently took over a car that has a smartrise controller (don't have many on account currently so we aren't too familiar with it)... had an issue last week that resulted in us having to leave it shutdown, we killed power to it when leaving the site. Returning to the site and putting the power back on we found that we had several issues with it - spoke with tech support and we had to go back to default settings on the program and then reteach, reporgram, etc all of it... we now have it running but it's not running properly, we keep getting a fault related to the brake switch. Weird thing is that further troubleshooting found a relay for that brake switch that was missing one of the coil wires completely.

So had 2 questions for anyone familiar with SmartRise...

1. is it normal to lose the program or have to go back and reset it then reprogram it completely just by killing power like that? or is there something we are missing here?

2. this brake pick switch relay missing a coil wire - any reason someone would remove that? like I said we only took it over a month ago so I'm just wondering if the previous company had a recurring issue or something and they removed this completely by taking away power to that relay. Although I find that hard to believe as its related to the brake i just can't seem to understand how it ran previously with no issue like this.

Appreciate any help.

#31572 - 08/16/21 10:51 PM Re: Smartrise Run issue [Re: ElevatorGuy128]  
Joined: Jun 2015
Posts: 47
ILikeElevs Offline
newbie
ILikeElevs  Offline
newbie

Joined: Jun 2015
Posts: 47
USA
Why don't you just contact SmartRise directly...(469) 678-8000

#31579 - 08/17/21 07:09 PM Re: Smartrise Run issue [Re: ILikeElevs]  
Joined: Jun 2018
Posts: 102
ElevatorGuy128 Offline
member
ElevatorGuy128  Offline
member

Joined: Jun 2018
Posts: 102
We did call them directly, all of this was after working with them for a few hours on it..... it was SmartRise who suggested we reset it to default settings then reprogram it all over. We also worked with them on resetting it and reprogramming it and then troubleshooting after that. But even the tech we were working with said that the controller should not lose its memory like this when powered off but said he didn't know why it would do that.

#31629 - 08/29/21 02:35 AM Re: Smartrise Run issue [Re: ElevatorGuy128]  
Joined: Nov 2018
Posts: 3
Adrian Offline
stranger
Adrian  Offline
stranger

Joined: Nov 2018
Posts: 3
Give me some info i can help. Why type of drive do you have HPV 900/600 do you have an external brake board?
Do you have physical switches on your brakes?

#31636 - 08/30/21 01:48 AM Re: Smartrise Run issue [Re: ElevatorGuy128]  
Joined: Jul 2021
Posts: 11
Sun Offline
stranger
Sun  Offline
stranger

Joined: Jul 2021
Posts: 11
The Tech support from Smartrise are great if you are able to help them understands the exact problem you are having. When resetting a board, there are many hidden parameters that needs to be set and try to solve only one problem at a time.

#31637 - 08/30/21 02:04 AM Re: Smartrise Run issue [Re: ElevatorGuy128]  
Joined: Dec 2010
Posts: 566
elmcannic Offline
addict
elmcannic  Offline
addict

Joined: Dec 2010
Posts: 566
S. Central Utah
Not sure about the programing issues your having trouble with, but the brake? Typically some tech disconnects the brake switch due to a mal adjusted brake, or drive settings they cannot figure out. Faults, call backs and shutdowns related to the brake need to be dealt with properly, and not by disconnecting or altering program settings looking for a brake input signal. Re establish the brake contact and you’ll no doubt be subject to a rash of brake related calls, then it’ll be your turn to figure it out. Be sure to let your supervisor know about this if you haven’t already. And if there is any documentation from the previous service contractor, review that as well. The building manager might be well aware of a problem they thought was fixed months earlier.

#32144 - 11/28/21 04:24 AM Re: Smartrise Run issue [Re: ElevatorGuy128]  
Joined: Dec 2015
Posts: 48
liftronic Offline
LA Elevator
liftronic  Offline
LA Elevator

Joined: Dec 2015
Posts: 48
US
Smartrise used to have a great tech-support, but its not good anymore. Ive heard many of their key tech support people have left the company and that's why it sucks now. I am glad people in this forum can still help.
Be careful about their brake control system specially their brake boards, they are not safe at all. My mechanic was on top of the car on construction mode and the brake board failed in an unsafe state and kept the brake open all the time, even the brake contactor didn't drop! He was lucky and could jump off the car.
All their tech support did was to send a new brake board but I don't feel safe to use it again. I don't know how they get safety certifications!


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.073s Queries: 15 (0.011s) Memory: 2.6952 MB (Peak: 2.8702 MB) Zlib disabled. Server Time: 2024-03-29 05:53:59 UTC