0 registered members (),
14
guests, and
4
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums13
Topics6,525
Posts36,929
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#32743 - 03/21/22 11:01 AM
Re: Magnetek HPV900 series 2
[Re: UnkindBuffalo]
|
Joined: Aug 2014
Posts: 113
KSNY
member
|
member
Joined: Aug 2014
Posts: 113
|
Drive is failing or one of the phase adjustments are out of tolerance. Is this on a newer machine or an old machine?
I like elevators and cars. Be Smart Work Safe!
|
|
|
#32744 - 03/21/22 11:05 AM
Re: Magnetek HPV900 series 2
[Re: KSNY]
|
Joined: Aug 2014
Posts: 113
KSNY
member
|
member
Joined: Aug 2014
Posts: 113
|
Drive is failing or one of the phase adjustments are out of tolerance. Is this on a newer machine or an old machine? also are you running an encoder?
I like elevators and cars. Be Smart Work Safe!
|
|
|
#32752 - 03/22/22 11:09 AM
Re: Magnetek HPV900 series 2
[Re: UnkindBuffalo]
|
Joined: Aug 2014
Posts: 113
KSNY
member
|
member
Joined: Aug 2014
Posts: 113
|
Motor is about 10yrs old, does have an encoder, it’s very random tho, it can run a few days, or run for 2 hrs before it shuts down, I sat and watched the controller during there chow runs… it in a jail, and it never shuts down, it has never shutdown when I was there, just get the call for it, reset and it takes off how long has the drive been installed for?
I like elevators and cars. Be Smart Work Safe!
|
|
|
#32753 - 03/22/22 03:52 PM
Re: Magnetek HPV900 series 2
[Re: UnkindBuffalo]
|
Joined: Nov 2016
Posts: 105
Goat
member
|
member
Joined: Nov 2016
Posts: 105
|
Id be looking at the motor contactor contacts. If it was a building power issue, you would most likely get an under voltage fault. Is it the original Sprecher/Shu contactor? Also, is it only faulted on the drive? Are you having to ANSI reset also?
Last edited by Goat; 03/22/22 03:54 PM.
|
|
|
|
|