RS232 To USB not working

You are not logged in. [Log In] Home Forums Technical Questions RS232 To USB not working

0 registered members (), 21 guests, and 0 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#33547 - 07/31/22 10:51 PM RS232 To USB not working
Joined: Jun 2014 Posts: 37 wiz newbie
wiz newbie Joined: Jun 2014 Posts: 37	Greetings I am using terminal with Smart.Trm on a Schindler smart mrl 002 elevator. My connection is as follows male connector - female null modem - female null modem - male RS232 connector to usb comm port 2 in terminal settings. I can list the commands in terminal but I am not receiving data, anyone else had this issue. What is your settings in terminal? Must I put on a dip switch? Thank You

#33565 - 08/02/22 05:01 PM Re: RS232 To USB not working [Re: wiz]
Joined: Jun 2014 Posts: 37 wiz newbie
wiz newbie Joined: Jun 2014 Posts: 37	Greetings Is the problem my RS232 cable?

#33566 - 08/02/22 05:09 PM Re: RS232 To USB not working [Re: wiz]
Joined: May 2012 Posts: 88 sampler journeyman
sampler journeyman Joined: May 2012 Posts: 88	can you show the cable photo by uploading

#33568 - 08/03/22 07:52 AM Re: RS232 To USB not working [Re: wiz]
Joined: Aug 2014 Posts: 134 Alex75 member
Alex75 member Joined: Aug 2014 Posts: 134 Sweden	What version of the SCIC pcb do you have? Some the earlier ones had a different com setting then the later ones....

#33574 - 08/03/22 10:47 PM Re: RS232 To USB not working [Re: wiz]
Joined: Jun 2014 Posts: 37 wiz newbie
wiz newbie Joined: Jun 2014 Posts: 37	Greetings My SCIC pcb Version 3.1. V3.1 is old. no wonder my RS232 to USB is not connecting. Anyone know if I can do a dip switch to look at errors on the COP? Thanks Alex75 & Sampler.

#33579 - 08/04/22 01:16 PM Re: RS232 To USB not working [Re: wiz]
Joined: Jun 2014 Posts: 37 wiz newbie
wiz newbie Joined: Jun 2014 Posts: 37	Originally Posted by wiz Greetings My SCIC pcb Version 3.1. V3.1 is old. no wonder my RS232 to USB is not connecting. Anyone know if I can do a dip switch to look at errors on the COP? Thanks Alex75 & Sampler. Greetings Anyone with pdf on SCIC PCB V3.1? Bless

#33580 - 08/04/22 03:37 PM Re: RS232 To USB not working [Re: wiz]
Joined: Aug 2014 Posts: 134 Alex75 member
Alex75 member Joined: Aug 2014 Posts: 134 Sweden	The com settings for a SCIC Q3.1 board shoud be as below.... Baud Rate 9600 Data Bit 8 Parity None Stop Bit 1 Flow Control OFF Any hyperterminal should be working or Cadi Bionic.

#33585 - 08/04/22 06:46 PM Re: RS232 To USB not working [Re: Alex75]
Joined: Jun 2014 Posts: 37 wiz newbie
wiz newbie Joined: Jun 2014 Posts: 37	Originally Posted by Alex75 The com settings for a SCIC Q3.1 board shoud be as below.... Baud Rate 9600 Data Bit 8 Parity None Stop Bit 1 Flow Control OFF Any hyperterminal should be working or Cadi Bionic. Greetings Used the SCIC 3.1 Com settings, shows the commands in both Cadi Bionic & Terminal but not receiving any data from the SCIC.. Also used a null modem. Cheers

#33588 - 08/04/22 08:42 PM Re: RS232 To USB not working [Re: Alex75]
Joined: May 2012 Posts: 88 sampler journeyman
sampler journeyman Joined: May 2012 Posts: 88	Alex75, do you know terminal can be used instead of cadi bionic for 3300 model

Photo Gallery