Ascension 2000 CPS fault

You are not logged in. [Log In] Home Forums Technical Questions Ascension 2000 CPS fault

0 registered members (), 31 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#35033 - 03/31/23 11:45 PM Ascension 2000 CPS fault
Joined: Apr 2019 Posts: 5 RE Elevator stranger
RE Elevator stranger Joined: Apr 2019 Posts: 5 Canada	I’ve got an Ascension 2000 that I need to keep running for a few more months until it’s modernized. It had personality faults so I got a new CPU board installed but every time I try to do a learn run it stops just above the main floor and has a CPS fault. I’ve replaced the complete tape reader and both boards that plug into the CPU - still no luck. Anyone have some advice??

#35034 - 04/01/23 03:30 PM Re: Ascension 2000 CPS fault [Re: RE Elevator]
Joined: Dec 2015 Posts: 1,538 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,538 Local 18	Back when you just had the Personality fault, did you find any Display 9 or Display A parameters that were not right?

#35035 - 04/01/23 06:45 PM Re: Ascension 2000 CPS fault [Re: RE Elevator]
Joined: May 2021 Posts: 45 Fehlerteufel newbie
Fehlerteufel newbie Joined: May 2021 Posts: 45	maybe this will help you: https://www.youtube.com/watch?v=0wkYv4CX7t0 https://www.youtube.com/watch?v=IuoeSo2t8XA

#35036 - 04/01/23 10:01 PM Re: Ascension 2000 CPS fault [Re: RE Elevator]
Joined: Dec 2010 Posts: 566 elmcannic addict
elmcannic addict Joined: Dec 2010 Posts: 566 S. Central Utah	Did you clear the fault buffers C & D? You mention the “two boards that plug into the CPU”. Did you mean the two boards in the selector itself? You’ve replaced the “Complete tape reader”. Boards and guides? Field Wiring and gray cable wires are secure? And which landing is the main floor, 1 or 2? Check the 5volt supply.

Photo Gallery