Payne elevator resistor overheated

You are not logged in. [Log In] Home Forums Technical Questions Payne elevator resistor overheated

1 registered members (SteveR), 17 guests, and 3 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,527

Posts36,935

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#35403 - 06/24/23 06:46 PM Payne elevator resistor overheated
Joined: Jun 2023 Posts: 3 Pauli466 stranger
Pauli466 stranger Joined: Jun 2023 Posts: 3	https://photos.app.goo.gl/CVF5b8dPNo89qXSv8. Resistor overheated still trying to dig up some schematics Last edited by Pauli466; 06/24/23 07:04 PM.

#35404 - 06/24/23 10:14 PM Re: Payne elevator resistor overheated [Re: Pauli466]
Joined: Jun 2023 Posts: 3 Pauli466 stranger
Pauli466 stranger Joined: Jun 2023 Posts: 3	Originally Posted by Pauli466 https://photos.app.goo.gl/CVF5b8dPNo89qXSv8. Resistor overheated still trying to dig up some schematics I've been looking for corroded loose connections. I can't find anyone familiar with this ancient system, looks like I'm on my own here Last edited by Pauli466; 06/24/23 10:16 PM. Reason: misspelling's

#35406 - 06/26/23 01:44 AM Re: Payne elevator resistor overheated [Re: Pauli466]
Joined: Aug 2013 Posts: 57 Msd journeyman
Msd journeyman Joined: Aug 2013 Posts: 57	Hi, controller looks like either OThompson, MG. If the resistor is in series with the brake coil usually is 150ohm 225watts 8 - 10". Wired to be a holding voltage If parallel would be a dumping resistor about 1500ohms. Assuming the brake is a DC coil, not an AC wet brake.

#36146 - 10/21/23 02:14 PM Re: Payne elevator resistor overheated [Re: Pauli466]
Joined: Mar 2016 Posts: 1 nalahim stranger
nalahim stranger Joined: Mar 2016 Posts: 1	Still need assistance? lmk

Photo Gallery