Sigma Di2(Di1) problem

You are not logged in. [Log In] Home Forums Technical Questions Sigma Di2(Di1) problem

1 registered members (WarrioR), 30 guests, and 3 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#35972 - 09/20/23 03:22 PM Sigma Di2(Di1) problem
Joined: Feb 2021 Posts: 37 VatorMech93 newbie
VatorMech93 newbie Joined: Feb 2021 Posts: 37 New York, New York	I am not sure if this is the correct controller model, but this is what the tag on the cabinet says. I have the following stack of boards in the controller cabinet: DOC-220, DOR-232, DOR-232, DPC-122. We just picked up this job, and I don’t have any manual on the controller. The elevator is shutdown with the following display; ACD=03 08FL 000% E016-91 000000 S if anyone would be able to give me a fault description it has access to a manual, ide really appreciate it.

#35977 - 09/20/23 05:44 PM Re: Sigma Di2(Di1) problem [Re: VatorMech93]
Joined: May 2021 Posts: 45 Fehlerteufel newbie
Fehlerteufel newbie Joined: May 2021 Posts: 45	Send me your email.

#35978 - 09/20/23 05:49 PM Re: Sigma Di2(Di1) problem [Re: Fehlerteufel]
Joined: Feb 2021 Posts: 37 VatorMech93 newbie
VatorMech93 newbie Joined: Feb 2021 Posts: 37 New York, New York	Thank you, I just sent you a PM

#35981 - 09/21/23 12:16 AM Re: Sigma Di2(Di1) problem [Re: VatorMech93]
Joined: Feb 2021 Posts: 37 VatorMech93 newbie
VatorMech93 newbie Joined: Feb 2021 Posts: 37 New York, New York	In case anyone referenced this post, I got the car running. One of our power supply was only putting out 3.7vDC on our 5vDC output side. Adjusting the pot on the power supply would only bring the voltage up to 4vDC, then it would completely stop putting out any voltage. Replaced the power supply and the car is back up and running.

#35985 - 09/21/23 02:24 AM Re: Sigma Di2(Di1) problem [Re: VatorMech93]
Joined: Apr 2020 Posts: 401 Montana addict
Montana addict Joined: Apr 2020 Posts: 401	Thank you for the update.

Photo Gallery