V3f20 drive help

You are not logged in. [Log In] Home Forums Technical Questions V3f20 drive help

0 registered members (), 26 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#36010 - 09/26/23 12:44 PM V3f20 drive help
Joined: Sep 2014 Posts: 29 misigun newbie
misigun newbie Joined: Sep 2014 Posts: 29	Hi ! I have a tms600 Kone with v3f20 drive.i recently replaced the main board and I want to put the parameters in the drive. I have the invmot program I have also a rs232 to usb cable but I cannot connect to the drive. Port is correct. Is it any other way to insert the parameters or what Ian missing?

#36012 - 09/26/23 02:08 PM Re: V3f20 drive help [Re: misigun]
Joined: May 2021 Posts: 45 Fehlerteufel newbie
Fehlerteufel newbie Joined: May 2021 Posts: 45	Do you have a "Null-Modem Adapter 9-pol", Pin 2->3 Pin 3->2 Pin5->5? Pins at a standard RS232 USB cable is not crossover. SW version of the V3F30 MCB H0x ? Version of the invmon? Attached Files V3F20_Front.jpg (15 downloads) Last edited by Fehlerteufel; 09/26/23 02:22 PM.

#36014 - 09/26/23 03:36 PM Re: V3f20 drive help [Re: misigun]
Joined: Sep 2014 Posts: 29 misigun newbie
misigun newbie Joined: Sep 2014 Posts: 29	I believe this is the problem.the crossover. I'll try it. Thanks alot.dodnt remember the version of invmon.if you have any latest could you send it? Last edited by misigun; 09/26/23 03:38 PM.

#36015 - 09/26/23 03:53 PM Re: V3f20 drive help [Re: misigun]
Joined: May 2021 Posts: 45 Fehlerteufel newbie
Fehlerteufel newbie Joined: May 2021 Posts: 45	I do not have any versions of the invmon.

Photo Gallery