Sent CPU board off for repair and now since putting board back in and turning unit on. Car runs between 1st and 4th floor (top) constantly. Runs up high speed mostly but will run up at leveling speed and runs down always on leveling speed. Doors don’t open. Sometimes says parking but not always. No stuck 4th floor buttons. Have no DCL or DOL in IO map. Have door parameters when checking in IMS door fast. Also have GLR, DCL and DCL6 in door fast. Have floor counts and counting up/down in motion diagnostics window. No faults and car says automatic. If you put in a call to another floor car will level into that floor but then continue onto 4th floor. Looking for any ideas or suggestions.