Who's Online Now
1 registered members (Indirtwetrust), 10 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,657
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#10105 - 03/16/14 05:39 AM KONE board installation  
Joined: Mar 2014
Posts: 12
haroon Offline
stranger
haroon  Offline
stranger

Joined: Mar 2014
Posts: 12
I have to install LCEKNX board of KONE in LCECPUnc board for the KONE elevator but i have no idea about its connection therefore can anybody provide me any technical information about its installation.

#10233 - 03/27/14 07:30 PM Re: KONE board installation [Re: haroon]  
Joined: Nov 2013
Posts: 93
koneisland Offline
journeyman
koneisland  Offline
journeyman

Joined: Nov 2013
Posts: 93
Just plug it into CPU. No need to do anything else.

#10234 - 03/27/14 08:53 PM Re: KONE board installation [Re: haroon]  
Joined: Jan 2013
Posts: 79
Dmhughes Offline
journeyman
Dmhughes  Offline
journeyman

Joined: Jan 2013
Posts: 79
Yorkshire UK
Hi
Are you putting it for any reason or are you just wanting to access the menu, as the last post says just plug it in and you have access.

Dave

#10301 - 04/07/14 10:15 AM Re: KONE board installation [Re: Dmhughes]  
Joined: Mar 2014
Posts: 12
haroon Offline
stranger
haroon  Offline
stranger

Joined: Mar 2014
Posts: 12

Actually i have to get access on its menu but when i plugin this KNX card on my CPU that is LCECPUnc than nothing happened. This KNX board is new therefore do you have any solution?

#10987 - 06/11/14 04:53 PM Re: KONE board installation [Re: haroon]  
Joined: Nov 2013
Posts: 93
koneisland Offline
journeyman
koneisland  Offline
journeyman

Joined: Nov 2013
Posts: 93
Considering the very basic information you request I would suggest you give up messing around with equipment you clearly have little knowledge of and leave it to someone who knows what they are doing

#10989 - 06/11/14 05:37 PM Re: KONE board installation [Re: koneisland]  
Joined: Jan 2013
Posts: 79
Dmhughes Offline
journeyman
Dmhughes  Offline
journeyman

Joined: Jan 2013
Posts: 79
Yorkshire UK
Are you sure you've got a KNX & not a VOI it wouldn't be the first time someone made that mistake and a costly one at that, it will say on the front just under the transformer sticking through the top??

#11002 - 06/14/14 12:31 PM Re: KONE board installation [Re: Dmhughes]  
Joined: Mar 2013
Posts: 37
zammy Offline
newbie
zammy  Offline
newbie

Joined: Mar 2013
Posts: 37
Older LCECPU´s CPU software versions 3.xx – 5.xx

Solution 1 Remove NV Ram pack whilst elevator still powered up and replace with new clean NV Ram.
This solution works but it could prove to be dangerous removing Ram while power still on to elevator.

Solution 2. Clear run counter and reset to zero
Location of code
0FAE – 0FAF Clear & insert 0000
0FD6 – 0FD7 Clear & insert 0000
0FD8 – 0FD9 Clear & insert 0000

For this You need a NVRAM DS1230Y-70, RAM editor, HEX editor and computer

#11004 - 06/14/14 01:25 PM Re: KONE board installation [Re: zammy]  
Joined: Jun 2013
Posts: 80
ThyssenKrapp Offline
GDB
ThyssenKrapp  Offline
GDB

Joined: Jun 2013
Posts: 80
Or you can buy a modu-tool and reset as many as you like, not cheap at £2500.00

there are also tools on the market for about £700.00 that will give you 200 resets.

#11005 - 06/14/14 01:26 PM Re: KONE board installation [Re: ThyssenKrapp]  
Joined: Jun 2013
Posts: 80
ThyssenKrapp Offline
GDB
ThyssenKrapp  Offline
GDB

Joined: Jun 2013
Posts: 80
Out of interest how much do KONE charge for a KNX in the States?


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.103s Queries: 15 (0.042s) Memory: 2.7091 MB (Peak: 2.9014 MB) Zlib disabled. Server Time: 2024-03-29 15:33:04 UTC