Tac 20

You are not logged in. [Log In] Home Forums Technical Questions Tac 20

2 registered members (Flyballgov, EElevator), 8 guests, and 1 spider.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,495

Posts36,783

Members8,395

Most Online117
Jan 16th, 2020

Print Thread

#11886 - 08/25/14 06:52 PM Tac 20
Joined: Aug 2014 Posts: 2 Tige stranger
Tige stranger Joined: Aug 2014 Posts: 2	Tac 20 hydro. I have a 1008 followed by a 1088 fault code. Any suggestions? Thanks Tige. Last edited by Tige; 08/25/14 06:58 PM.

#11899 - 08/28/14 01:39 AM Re: Tac 20 [Re: Tige]
Joined: Jan 2014 Posts: 18 mrhappy stranger
mrhappy stranger Joined: Jan 2014 Posts: 18	motor up to speed shorted maybe

#11912 - 08/28/14 03:50 PM Re: Tac 20 [Re: mrhappy]
Joined: Aug 2014 Posts: 2 Tige stranger
Tige stranger Joined: Aug 2014 Posts: 2	So, up to speed in the Electronic Motor Starter?

#11915 - 08/29/14 12:16 AM Re: Tac 20 [Re: Tige]
Joined: Mar 2012 Posts: 104 kenelev member
kenelev member Joined: Mar 2012 Posts: 104	Agreed with mrhappy. Short on soft starter control board.

#11931 - 08/30/14 12:12 PM Re: Tac 20 [Re: kenelev]
Joined: Oct 2013 Posts: 174 NOTIME member
NOTIME member Joined: Oct 2013 Posts: 174	1008: Motor Contactor Already Energized (MCD/MCE). Run initiation was issued, but either MCD was already inactive or MCE was already active. S Defective I/O S Software activation error S Defective Relays 1088: Motor Contactor OFF. Car does not have a run request, butMCE input indicates that themotor contactor was still enabled. S Stuck Motor Contactor Auxiliary Contact S Defective MCE input S Bad CPU card

Photo Gallery