Who's Online Now
1 registered members (Flyballgov), 10 guests, and 1 spider.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,647
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#16749 - 04/14/16 12:43 AM Dmc door board  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
Having issues where doors stop working in both the close and the open positions. Tried swapping door board 3 times and problem doesn't go away. Won't even learn the door run. Does the clc prevent this from happening or the door op board?

#16751 - 04/14/16 01:11 AM Re: Dmc door board [Re: beaupeep]  
Joined: Dec 2009
Posts: 534
solidstate Offline
addict
solidstate  Offline
addict

Joined: Dec 2009
Posts: 534
the door board is only going to do what the clc tells it to do. Will it work with the MDO and MCO?

#16760 - 04/14/16 01:42 PM Re: Dmc door board [Re: solidstate]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
What is mdo and mco

#16763 - 04/14/16 04:28 PM Re: Dmc door board [Re: beaupeep]  
Joined: Apr 2016
Posts: 22
Getemup Offline
stranger
Getemup  Offline
stranger

Joined: Apr 2016
Posts: 22
On the door board you have 3 buttons mdo is the manual door open and manual door close mdc and then a reset button

Last edited by Getemup; 04/14/16 04:29 PM.
#16764 - 04/14/16 04:36 PM Re: Dmc door board [Re: Getemup]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
Can do a door scan but it won't allow me to save pulse count parameter. Any reason for that? Sup doesn't clear on step 7 which means pulse count wasn't saved. What prevents pulse count from being saved in clc

Last edited by beaupeep; 04/14/16 04:40 PM.
#16766 - 04/14/16 06:12 PM Re: Dmc door board [Re: beaupeep]  
Joined: Mar 2016
Posts: 191
lowoil Offline
Elevator guy
lowoil  Offline
Elevator guy

Joined: Mar 2016
Posts: 191
Wisconsin
Go back and check all adjustments especially 62-69

#16767 - 04/14/16 06:15 PM Re: Dmc door board [Re: beaupeep]  
Joined: Apr 2016
Posts: 22
Getemup Offline
stranger
Getemup  Offline
stranger

Joined: Apr 2016
Posts: 22
Might want to check the encoder and also could possibly be the clc. Also make sure that you getting the dol and the dcl leds to light on the door board

#16769 - 04/14/16 06:51 PM Re: Dmc door board [Re: Getemup]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
Does 65000 pulses sound normal?

#16770 - 04/14/16 07:10 PM Re: Dmc door board [Re: beaupeep]  
Joined: Jul 2013
Posts: 198
NewMech Offline
member
NewMech  Offline
member

Joined: Jul 2013
Posts: 198
Sounds high to me, last one I did was 490.

#16771 - 04/14/16 07:23 PM Re: Dmc door board [Re: NewMech]  
Joined: Apr 2016
Posts: 22
Getemup Offline
stranger
Getemup  Offline
stranger

Joined: Apr 2016
Posts: 22
Sounds high to me as well I think that the last one I set up was 675

#16772 - 04/14/16 10:46 PM Re: Dmc door board [Re: Getemup]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
Does the high tach prevent the save. Will try to replace the tach

#16773 - 04/15/16 12:34 AM Re: Dmc door board [Re: beaupeep]  
Joined: Feb 2013
Posts: 757
john jay Offline
old hand
john jay  Offline
old hand

Joined: Feb 2013
Posts: 757
ohio
I know this sounds simple, but a lot of the time new belts can fix a problem like this. If they slip even a little the encoder counts are off. Just something to keep in mind.

#16775 - 04/15/16 04:12 AM Re: Dmc door board [Re: john jay]  
Joined: May 2012
Posts: 194
Len Offline
member
Len  Offline
member

Joined: May 2012
Posts: 194
..might want to changeout the motor had a problem recently on two of my cars at random jobs..

#16776 - 04/15/16 04:26 AM Re: Dmc door board [Re: Len]  
Joined: Mar 2014
Posts: 212
Silly Offline
enthusiast
Silly  Offline
enthusiast

Joined: Mar 2014
Posts: 212
I'm with John jay on this one. At least try and tighten the belts before going for an encoder.

#16798 - 04/17/16 02:58 PM Re: Dmc door board [Re: Silly]  
Joined: Dec 2015
Posts: 1,528
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,528
Local 18
That should have the big black plastic, analog encoder. I have seen the little digital encoder on these when we pick up new jobs. I think they are 500 cpr, DMC won't save a travel that high. I have also got way high travel #s replacing the analog encoder switches with Sees parts, I know it doesn't make sense but it worked fine with TK parts. If anyone else has seen that or can explain it I would appreciate hearing about it.

#16814 - 04/20/16 12:41 AM Re: Dmc door board [Re: Indirtwetrust]  
Joined: Mar 2015
Posts: 80
Whadafack Offline
journeyman
Whadafack  Offline
journeyman

Joined: Mar 2015
Posts: 80
Make sure your replacing it with a 6300py4 board. Install the capacitor in the controller on p150 and g150. Replace all the belts. If they are dry-rotted or too tight or loose it will throw the counts off. Make sure the door close and open limits make. Good luck

#16856 - 04/26/16 03:32 AM Re: Dmc door board [Re: Whadafack]  
Joined: Dec 2012
Posts: 25
Street rodder Offline
newbie
Street rodder  Offline
newbie

Joined: Dec 2012
Posts: 25
Well if your CLC is an old version the new door board won't communicate with it, then you have to upgrade all the boards.

#17135 - 05/20/16 08:31 PM Re: Dmc door board [Re: Street rodder]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
Ok, i've replaced motor, encoder, belts, door board. It's practically a new door op and i'm still getting a 65000 pulse count. Anyone have any other ideas

#17137 - 05/21/16 01:10 AM Re: Dmc door board [Re: beaupeep]  
Joined: Dec 2015
Posts: 1,528
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,528
Local 18
Do you get a different count if you move a limit?

#17140 - 05/21/16 03:42 AM Re: Dmc door board [Re: Indirtwetrust]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
Yes, it gets higher

Page 1 of 2 1 2

Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.044s Queries: 16 (0.011s) Memory: 2.8040 MB (Peak: 3.0836 MB) Zlib disabled. Server Time: 2024-03-28 18:54:36 UTC