Who's Online Now
0 registered members (), 17 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,656
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#21230 - 07/25/17 01:10 PM Gen2 Regen with GDCB  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
Dear All,

Could you help, please?
Gen2 Regen stopped with error 713 Block by 208, the first problem happened did power supply reset then the lift ran normally for 3/4 days only. 208 error means a fault on the capacitors of DC link, but we can't find any problem on capacitors. Any an idea about this issue?
Thanks in advance

#21231 - 07/25/17 02:19 PM Re: Gen2 Regen with GDCB [Re: Yus123]  
Joined: Aug 2016
Posts: 732
Jluff Offline
old hand
Jluff  Offline
old hand

Joined: Aug 2016
Posts: 732
Check the batteries. Even if they read good they still need to be replaced every few years.

#21233 - 07/25/17 05:59 PM Re: Gen2 Regen with GDCB [Re: Jluff]  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
Dear Jluff,

which battery do you mean?

#21240 - 07/27/17 04:51 AM Re: Gen2 Regen with GDCB [Re: Yus123]  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
Lift OK after changed the GDCB part number ACA26800KT1.
Thanks ALL

#21254 - 07/30/17 05:40 AM Re: Gen2 Regen with GDCB [Re: Yus123]  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
after 3 days working well, lift again shut down with the same the error " error 713 Block by 208 "

#21255 - 07/30/17 04:00 PM Re: Gen2 Regen with GDCB [Re: Yus123]  
Joined: Jul 2013
Posts: 198
NewMech Offline
member
NewMech  Offline
member

Joined: Jul 2013
Posts: 198
Drive caps are getting weak. If you can source new, replace them. This is a known issue on newer drives, there is an upgraded drive available from Otis.

#21311 - 08/08/17 12:16 PM Re: Gen2 Regen with GDCB [Re: NewMech]  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
lift working well after replaced 3 contactors inside the drive


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.028s Queries: 14 (0.007s) Memory: 2.6919 MB (Peak: 2.8658 MB) Zlib disabled. Server Time: 2024-03-29 12:41:06 UTC