Who's Online Now
0 registered members (), 9 guests, and 1 spider.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,466
Posts36,640
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#21756 - 09/28/17 11:17 PM TAC-20 Programming  
Joined: Jul 2017
Posts: 10
Elevate66 Offline
93 Cobra Mustang
Elevate66  Offline
93 Cobra Mustang

Joined: Jul 2017
Posts: 10
Utah, United States
Thank you in advance for reading.
Having a problem reprogramming a new OEM TAC 20 CPU board. The laptop won't communicate with the board to reload the software. Pulls up a "Node is not online" error. Have tried to transfer eeprom, but the files emailed from Thyssen aren't eeprom files, they're .dat files, and the IMS program doesn't recognize them as eeprom, which they may not be anyway. The laptop recognizes the #1 elevator on the duplex and can transfer files back and forth, but it doesn't connect properly to the #2 elevator(2 stop duplex). I know it connects because the reload button becomes available when I plug it in, even though it won't allow me to reload the files.
Any idea where to go from here? Thanks again.

Respectfully,

#21757 - 09/29/17 12:06 PM Re: TAC-20 Programming [Re: Elevate66]  
Joined: Jan 2014
Posts: 736
Rolly Offline
old hand
Rolly  Offline
old hand

Joined: Jan 2014
Posts: 736
Well unless you did a transfer with IMS there are no files to upload. The .dat files are to be uploaded with hyperterminal using the reset and UDL buttons to get into Zmodem mode to send the .dat files to cpu and Memory. If you had previously transferred the file you could have uploaded that one with IMS.

#21758 - 09/29/17 05:12 PM Re: TAC-20 Programming [Re: Rolly]  
Joined: Jul 2017
Posts: 10
Elevate66 Offline
93 Cobra Mustang
Elevate66  Offline
93 Cobra Mustang

Joined: Jul 2017
Posts: 10
Utah, United States
Hey Rolly,

Thanks for the response. No, no transfer was done. Board was fried from power surge/outage. So if I upload the emailed files I received from Thyssen to a jump drive and plug that into the USB on the I/O-A board I should be able to make the transfer?

#21759 - 09/29/17 05:18 PM Re: TAC-20 Programming [Re: Elevate66]  
Joined: Jan 2014
Posts: 736
Rolly Offline
old hand
Rolly  Offline
old hand

Joined: Jan 2014
Posts: 736
Your in the wrong area of the forum.. post under correct topic.

#21763 - 09/29/17 10:41 PM Re: TAC-20 Programming [Re: Rolly]  
Joined: Jan 2017
Posts: 62
westcoast Offline
journeyman
westcoast  Offline
journeyman

Joined: Jan 2017
Posts: 62
I can't wait to know what the hell all that means...

#21765 - 09/30/17 02:30 AM Re: TAC-20 Programming [Re: westcoast]  
Joined: Jan 2014
Posts: 736
Rolly Offline
old hand
Rolly  Offline
old hand

Joined: Jan 2014
Posts: 736
What that means is Post to Technical Questions and not here where people looking to get into industry post.. DUH!

#22666 - 01/08/18 05:51 PM Re: TAC-20 Programming [Re: Elevate66]  
Joined: Jul 2017
Posts: 10
Elevate66 Offline
93 Cobra Mustang
Elevate66  Offline
93 Cobra Mustang

Joined: Jul 2017
Posts: 10
Utah, United States
My apologies Rolly, I was new to the site. Thanks for the heads up.


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.031s Queries: 15 (0.010s) Memory: 2.6922 MB (Peak: 2.8682 MB) Zlib disabled. Server Time: 2024-03-28 08:47:23 UTC