Who's Online Now
0 registered members (), 11 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,656
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#22521 - 12/18/17 03:18 PM Schindler Idd 330a door operator  
Joined: Apr 2013
Posts: 41
500fpm Offline
Elevator fixit guy
500fpm  Offline
Elevator fixit guy

Joined: Apr 2013
Posts: 41
Does anyone have a manual on the Scinder Idd 32 door operator that is commonly used on a 330a. It is the one that uses the LTI drive. It is showing an error and is running in slow speed all the time also seems to be pulsing slightly. Can the ssm service tool be used with this model?

Last edited by 500fpm; 12/18/17 03:18 PM.
#22768 - 01/17/18 04:55 PM Re: Schindler Idd 330a door operator [Re: 500fpm]  
Joined: May 2017
Posts: 94
Tamperprufe Offline
journeyman
Tamperprufe  Offline
journeyman

Joined: May 2017
Posts: 94
USA
Did you ever resolve your issue if so how?
Also did you ever find a manual on IDD? I do have some info on it
Theres not alot of info out there on that DO as it comes "pre-configured" per job specs. I also have same issue on one now.
I have used the SSM and all parameters appear to still be correct
SSM is giving me fault code "5" which I do not know what it is?

1) "running in slow speed" is synchronization speed
2) put elev on cartop insp. On D.O.do "hard reset" hold down open and close buttons at same time, all 5 leds should flash on and off after doors do learn run "ERR" led should be off.
3) my problem is I can not get doors to do learn run and "ERR" led off, it stays lit

#22790 - 01/18/18 11:11 PM Re: Schindler Idd 330a door operator [Re: 500fpm]  
Joined: Oct 2013
Posts: 174
NOTIME Offline
member
NOTIME  Offline
member

Joined: Oct 2013
Posts: 174

#22831 - 01/25/18 12:23 AM Re: Schindler Idd 330a door operator [Re: 500fpm]  
Joined: Apr 2013
Posts: 41
500fpm Offline
Elevator fixit guy
500fpm  Offline
Elevator fixit guy

Joined: Apr 2013
Posts: 41
I tried resetting the error every way possible. It still runs in slow speed only and slams in the open. We are going to replace the drive assembly.

#22927 - 02/03/18 02:31 AM Re: Schindler Idd 330a door operator [Re: 500fpm]  
Joined: Dec 2011
Posts: 259
beaupeep Offline
Mechanic
beaupeep  Offline
Mechanic

Joined: Dec 2011
Posts: 259
ontario
You might want to take a look at the read switch, if not adjusted correctly, it will never learn a run

#22943 - 02/04/18 04:06 PM Re: Schindler Idd 330a door operator [Re: 500fpm]  
Joined: Feb 2015
Posts: 77
BillS Offline
journeyman
BillS  Offline
journeyman

Joined: Feb 2015
Posts: 77
I believe ECI in Florida make a direct drop in replacement. Much easier to work with.

321-783-5858

#23764 - 04/14/18 04:59 PM Re: Schindler Idd 330a door operator [Re: Tamperprufe]  
Joined: Apr 2013
Posts: 41
500fpm Offline
Elevator fixit guy
500fpm  Offline
Elevator fixit guy

Joined: Apr 2013
Posts: 41
I ended up replacing it. The drive came programmed from the factory just had to adjust the opening distance with the ssm tool and do a learn. That new one did not come with a motor sheave and the old one was stuck so it took me a few hours to get it off.

#23766 - 04/14/18 07:39 PM Re: Schindler Idd 330a door operator [Re: 500fpm]  
Joined: May 2017
Posts: 94
Tamperprufe Offline
journeyman
Tamperprufe  Offline
journeyman

Joined: May 2017
Posts: 94
USA
yeah sometimes those sheaves don't wanna cooperate...instead of paying 4500 again for another new DO, see if you can get the old one repaired locally or send it off and when ya get it back I now have a tool(above and beyond the SSM) that allows you to set up the DO to match any job software configuration/requirements. PM me if your ever interested.

#25575 - 01/08/19 10:09 PM Re: Schindler Idd 330a door operator [Re: Tamperprufe]  
Joined: Dec 2015
Posts: 2
HDJ Offline
stranger
HDJ  Offline
stranger

Joined: Dec 2015
Posts: 2
Do you know of a company that fixes these ops?

#25688 - 01/17/19 08:44 PM Re: Schindler Idd 330a door operator [Re: HDJ]  
Joined: Feb 2015
Posts: 77
BillS Offline
journeyman
BillS  Offline
journeyman

Joined: Feb 2015
Posts: 77
Unless I am mistaken the mechanical components for this came from ECI, Canada. they are now owned by GAL but I do believe that Master Elevator products in NYC has a lot of their parts. http://www.kkes.biz/store.php/KINGOFPARTS/ct107809/elevator_parts_gal_hollisterwhitney__eci


The electronics was supplied by Schindler. I believe ECI in Florida, (no relation to ECI, Canada), make a direct drop in replacement. Much easier to work with.

321-783-5858


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.056s Queries: 15 (0.019s) Memory: 2.7183 MB (Peak: 2.9195 MB) Zlib disabled. Server Time: 2024-03-29 08:50:28 UTC