Who's Online Now
0 registered members (), 5 guests, and 1 spider.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,466
Posts36,640
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#24549 - 08/21/18 05:36 PM Thyssenkrupp- adjust door-open time  
Joined: Aug 2018
Posts: 4
MBF Offline
stranger
MBF  Offline
stranger

Joined: Aug 2018
Posts: 4
Hi
I have a problem about adjusting door-open time. My problem is that when the car is in landing, the door closes at speed so that it hits the passengers. Therefor I have changed this parameter by diagnostic units I and (VI) (WINDIAG software) but this change doesn't execute or apply on the door and it's still like before without any change.
Can anybody help me with my problem.
Thanks

Last edited by MBF; 08/21/18 05:36 PM.
#24550 - 08/21/18 07:22 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: May 2017
Posts: 94
Tamperprufe Offline
journeyman
Tamperprufe  Offline
journeyman

Joined: May 2017
Posts: 94
USA
if it's just a speed and or timer parameter adjustment then it's an easy fix, maybe someone here has the info to help you however on this forum most people use IMS not WINDIAG.

#24567 - 08/22/18 07:03 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: Dec 2010
Posts: 566
elmcannic Offline
addict
elmcannic  Offline
addict

Joined: Dec 2010
Posts: 566
S. Central Utah
Hits passengers? Better take the unit out of service ASAP until you get it fixed.

First; when blocked, does the detector edge work properly?
It sounds like your door closing speeds are culprit not door open time.

If your diagnostic has instructions, look at door adjustments for speed control. Or, the door card may be bad not allowing for values changed.

Also be sure the car door is mechanically sound. Loose bearing connection points can cause the doors
to not respond to control inputs as it should.

#24601 - 08/26/18 04:05 PM Re: Thyssenkrupp- adjust door-open time [Re: Tamperprufe]  
Joined: Aug 2018
Posts: 4
MBF Offline
stranger
MBF  Offline
stranger

Joined: Aug 2018
Posts: 4
thank you
is IMS a software? and can I change this parameter by it?

#24602 - 08/26/18 04:19 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: Aug 2018
Posts: 4
MBF Offline
stranger
MBF  Offline
stranger

Joined: Aug 2018
Posts: 4
thank you
door closing speed is similar to other elevators.but a way, there are tow door in the elevator and both of them have the problem. So there is not mechanical problem.
where is detector edge?

#24603 - 08/26/18 06:07 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: Aug 2018
Posts: 4
MBF Offline
stranger
MBF  Offline
stranger

Joined: Aug 2018
Posts: 4
it is important you know that the electronic card is MC3

#24604 - 08/26/18 08:53 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: Jan 2012
Posts: 885
jkh Offline
4 Ever Learning.
jkh  Offline
4 Ever Learning.

Joined: Jan 2012
Posts: 885
MBF,

I’ve never used, nor am I familiar with the software you are using. There are multiple door time parameters that control multiple door functions. How do you know you are even trying to change the correct parameters? Did the software come with a manual?

What is your profession?


Make good choices,

JKH
#24627 - 08/28/18 11:02 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: May 2017
Posts: 94
Tamperprufe Offline
journeyman
Tamperprufe  Offline
journeyman

Joined: May 2017
Posts: 94
USA
yes IMS(USA) is a diagnostic tool just like the WINDIAG(European) tool you are using however they are not compatible or interchangeable

#24639 - 08/30/18 04:27 PM Re: Thyssenkrupp- adjust door-open time [Re: MBF]  
Joined: Dec 2017
Posts: 37
Huskervator Offline
newbie
Huskervator  Offline
newbie

Joined: Dec 2017
Posts: 37
Parameter D24 is car call dwell time. D25 is hall call dwell time.


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.034s Queries: 14 (0.012s) Memory: 2.7095 MB (Peak: 2.9006 MB) Zlib disabled. Server Time: 2024-03-28 10:34:24 UTC