Who's Online Now
1 registered members (Elevator1994), 20 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
May
S M T W T F S
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Newest Members
K-tech Intl, Electricjunky17, Chris Shields, Eric S, Hope&Poke
5396 Registered Users
Forum Statistics
Forums13
Topics4,284
Posts26,576
Members5,396
Most Online72
Apr 10th, 2016
Previous Thread
Next Thread
Print Thread
#25049 - 10/23/18 05:05 PM Tac 32. Pressure problem  
Joined: Aug 2016
Posts: 221
Jluff Offline
enthusiast
Jluff  Offline
enthusiast

Joined: Aug 2016
Posts: 221
Hi guys. I got a tac 32 shutting down almost every morning with 2 faults
1110 - A17/B44 shutdown
1074 - jack low pressure shutdown

When this first happened I replaced the up leveling strainer and we had no problems for 10 days or so. Now it’s happening almost every morning. I adjusted the slow down on the valve body . But it is still shutting down.
Any ideas as to where to look next ?

#25054 - 10/23/18 08:57 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Mar 2016
Posts: 114
lowoil Offline
Elevator guy
lowoil  Offline
Elevator guy

Joined: Mar 2016
Posts: 114
Wisconsin
Make sure z44 is set to 100,did you turn in on the up slow down? An 1/8 or 1/16 turn in will stop those early morning stall outs.also check leveling speed after messing with up slow down .only seen this on brand new jobs dont remeber if it had the 1074 tho.

#25057 - 10/23/18 10:21 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Aug 2016
Posts: 221
Jluff Offline
enthusiast
Jluff  Offline
enthusiast

Joined: Aug 2016
Posts: 221
Thanks low oil. Can you tell me how to navigate on board to check z44

#25061 - 10/23/18 11:39 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Dec 2009
Posts: 346
solidstate Offline
enthusiast
solidstate  Offline
enthusiast

Joined: Dec 2009
Posts: 346
z44 would be the first thing. We had this issue not to long ago and posted on here. It was z44

#25067 - 10/24/18 09:52 AM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Aug 2016
Posts: 221
Jluff Offline
enthusiast
Jluff  Offline
enthusiast

Joined: Aug 2016
Posts: 221
How do I navigate to check and change z44?

#25074 - 10/24/18 08:09 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Dec 2009
Posts: 346
solidstate Offline
enthusiast
solidstate  Offline
enthusiast

Joined: Dec 2009
Posts: 346
You have to have IMS

#25080 - 10/25/18 11:53 AM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Aug 2016
Posts: 221
Jluff Offline
enthusiast
Jluff  Offline
enthusiast

Joined: Aug 2016
Posts: 221
I have ims for tac 20.

#25086 - 10/26/18 05:48 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Mar 2016
Posts: 114
lowoil Offline
Elevator guy
lowoil  Offline
Elevator guy

Joined: Mar 2016
Posts: 114
Wisconsin
Should work i just plugged into a 32 and hit the 20 portion on ims and it works fine

#25092 - 10/29/18 01:28 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Aug 2016
Posts: 221
Jluff Offline
enthusiast
Jluff  Offline
enthusiast

Joined: Aug 2016
Posts: 221
It’s a different port and cable?

#25100 - 10/30/18 12:54 AM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Mar 2016
Posts: 114
lowoil Offline
Elevator guy
lowoil  Offline
Elevator guy

Joined: Mar 2016
Posts: 114
Wisconsin
Jluff i sent u a pm

#25115 - 11/01/18 12:25 AM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Mar 2011
Posts: 115
xxXBlazeXxx Offline
member
xxXBlazeXxx  Offline
member

Joined: Mar 2011
Posts: 115
Ga.
TAC 32 is 32 bit. Maybe you have old IMS. Its the Black Icon thats 32 bit. And does it happen to have telescoping jacks?

#25362 - 12/06/18 12:47 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Sep 2015
Posts: 1
Tata Offline
stranger
Tata  Offline
stranger

Joined: Sep 2015
Posts: 1
Have problem with a tac32 hydro duplex . Only one car picks calls. The other has ebad light blinking. Could this be the problem ? What doesit mean.ITS MY FIRST TIME WITH THIS TYPE OF CONTROLLER

#25375 - 12/06/18 11:13 PM Re: Tac 32. Pressure problem [Re: Jluff]  
Joined: Dec 2015
Posts: 849
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 849
Local 18
That light means nothing on a hydro, not your problem.


Photo Gallery
KONE MX10 repair tool kit
Uncle Dad Here?
Refurbished Elevator Equipment
Plunger Lift
Kone MX10 traction machine resolver
My Dover homelift
otis fixtures
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.028s Queries: 14 (0.005s) Memory: 5.0487 MB (Peak: 5.3121 MB) Zlib disabled. Server Time: 2019-05-25 23:59:31 UTC