Who's Online Now
0 registered members (), 11 guests, and 1 spider.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,656
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#27584 - 08/07/19 07:19 AM Gen2 I overload  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
Hi Everyone

GEn2 XIZI Otis 1000kg if have a problem INS Down move about 30cm then stop, with TCBC error 1TH 2TH Drive error DVR : rollback start DRV : I overload
change the DIR on contact 0--> 1 INS and Correction UP OK, after DIR set back 0 and add 2 filler weight in car top lift possible Normal run for 24 hours then stop again the same issue. we already changed new drive OVFWW, swapped the DBR , checked the mechanical brake,, and the result remains the same.
Appreciate if you can help this problem

#27585 - 08/07/19 09:50 AM Re: Gen2 I overload [Re: Yus123]  
Joined: Aug 2014
Posts: 134
Alex75 Offline
member
Alex75  Offline
member

Joined: Aug 2014
Posts: 134
Sweden
Did you enter the correct values from the old drive? and preform a new learnrun and loadweigh calibration?

I would look at some specific parameters to start with:

LoadW Type (Type of loadweigh device)
SysInert (Inertia)
Balance (Balance of the system in %, Car/Counterweight)
ALWcomp Corr (Correction factor for internally calculated loadweighing compensation torque, ect Rollback/Rollforward)

What kind of software does your drive use? (ect GAA30785CAF or another software?)

/Alex

#27642 - 08/21/19 07:47 AM Re: Gen2 I overload [Re: Yus123]  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
Load weight calibration could not do because 4 pad sensors were damaged and got calibration missing sensor during calibration, then LoadW type I set 0 rather than 3 (others lifts Normal set to 0 also).
Learn Run and Encoder adjust have done and succeed.
Balance 47%
Software GAA30762 BAF1, I swapped from old drive about the software.
Last week we swapped whole drive to other lift and working well, then I got the same issue whenever put another drive to this site.

#27643 - 08/21/19 07:53 AM Re: Gen2 I overload [Re: Yus123]  
Joined: Jan 2016
Posts: 39
Yus123 Offline
newbie
Yus123  Offline
newbie

Joined: Jan 2016
Posts: 39
please find the attached pictures

Attached Files
load sensor.jpg (23 downloads)
GAA30762_edit.jpg (25 downloads)

Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.033s Queries: 15 (0.007s) Memory: 2.6693 MB (Peak: 2.8193 MB) Zlib disabled. Server Time: 2024-03-29 14:04:58 UTC