Tac 32 PLDBAD LED

You are not logged in. [Log In] Home Forums Technical Questions Tac 32 PLDBAD LED

0 registered members (), 19 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,514

Posts36,876

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#30014 - 10/05/20 04:58 PM Tac 32 PLDBAD LED
Joined: Jan 2019 Posts: 5 Kcmprize stranger
Kcmprize stranger Joined: Jan 2019 Posts: 5	Tac 32 CPU FPGA V1R4 IOD FPGA VERSION:0 BOOT V0R5 PLDBAD LED red, no SAFCPU OR SAFE LEDS FAULTS ON START UP 1926,1925 So far I have done a spc programming with no luck. Thanks for any suggestions in trouble shooting. I'm leaning toward bad output from SAFECPU internal.

#30015 - 10/05/20 07:09 PM Re: Tac 32 PLDBAD LED [Re: Kcmprize]
Joined: Dec 2015 Posts: 1,538 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,538 Local 18	What’s J16 set to?

#30018 - 10/05/20 11:00 PM Re: Tac 32 PLDBAD LED [Re: Kcmprize]
Joined: Mar 2016 Posts: 198 lowoil Elevator guy
lowoil Elevator guy Joined: Mar 2016 Posts: 198 Wisconsin	Did you try a get command?

#30019 - 10/05/20 11:08 PM Re: Tac 32 PLDBAD LED [Re: Kcmprize]
Joined: May 2015 Posts: 291 wltr00 enthusiast
wltr00 enthusiast Joined: May 2015 Posts: 291	Try GET command and then WRT & RST. If not check J16 as Dirt suggested. Should be 18 if a Hydro.

Photo Gallery

Page Time: 0.181s Queries: 16 (0.083s) Memory: 2.6702 MB (Peak: 2.8200 MB) Zlib disabled. Server Time: 2024-05-03 07:16:13 UTC