Help Shindler Miconic TXR5

You are not logged in. [Log In] Home Forums Technical Questions Help Shindler Miconic TXR5

0 registered members (), 12 guests, and 0 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,495

Posts36,789

Members8,395

Most Online117
Jan 16th, 2020

Print Thread

#30212 - 11/23/20 07:52 PM Help Shindler Miconic TXR5
Joined: Aug 2019 Posts: 1 Henry P. stranger
Henry P. stranger Joined: Aug 2019 Posts: 1	Had drive issues and the Igbts were replaced. Installed drive after repair. Car will not run. The SGRW OR THE SH contactors are not pulling in. Lcd says NO TRIP and shows doors closed. Safetys pull in. I am seeing Error Drive 135 DREC DRH but 201007 0x0000000B Anyone have any advice on this? Thanks in advance.

#30213 - 11/24/20 12:37 AM Re: Help Shindler Miconic TXR5 [Re: Henry P.]
Joined: Apr 2014 Posts: 263 heisenberg Engineer
heisenberg Engineer Joined: Apr 2014 Posts: 263	B (hex)/11 (dec): DRH-D button on the recall panel is pressed without active recall control JRH; check wiring of JRH / DRH-D It seems that your inspection wiring could be incorrect, wrong inputs going to the board.

Photo Gallery

Page Time: 0.059s Queries: 15 (0.014s) Memory: 2.6518 MB (Peak: 2.7869 MB) Zlib disabled. Server Time: 2024-04-20 00:18:52 UTC