Who's Online Now
0 registered members (), 13 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,654
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#31505 - 07/29/21 02:28 AM Schindler 3300  
Joined: Dec 2014
Posts: 7
charly17267 Offline
ELEVATOR TECH
charly17267  Offline
ELEVATOR TECH

Joined: Dec 2014
Posts: 7
I have a Schindler 3300. The LU sensor was broken. after replace that the CPU give me error 4305 and i dont know how to make a reset to clear that error and I can't not use Cadi because the port Com 1 it's not 9 pins and only have 5 pines in line... any help would be appreciated

[img]http://[/img]

Attached Files
20210728_223200.jpg (58 downloads)
Last edited by charly17267; 07/29/21 02:32 AM.
#31506 - 07/29/21 01:23 PM Re: Schindler 3300 [Re: charly17267]  
Joined: Aug 2014
Posts: 134
Alex75 Offline
member
Alex75  Offline
member

Joined: Aug 2014
Posts: 134
Sweden
Go to menu 10 - Enter
Submenu 127 - Enter
Change the 0 to 1 and hit enter.

UCM fault should be cleared now!

/Alex

#31508 - 07/29/21 02:35 PM Re: Schindler 3300 [Re: Alex75]  
Joined: Dec 2014
Posts: 7
charly17267 Offline
ELEVATOR TECH
charly17267  Offline
ELEVATOR TECH

Joined: Dec 2014
Posts: 7
Thanks Alex75
I will do do that and i will let you know...
Thanks for your fast answers 🙏🙏👍👍👍

#31519 - 07/31/21 05:44 AM Re: Schindler 3300 [Re: charly17267]  
Joined: Apr 2014
Posts: 263
heisenberg Offline
Engineer
heisenberg  Offline
Engineer

Joined: Apr 2014
Posts: 263
com1 port is not used for cadi..

#31528 - 08/02/21 03:34 PM Re: Schindler 3300 [Re: charly17267]  
Joined: Dec 2014
Posts: 7
charly17267 Offline
ELEVATOR TECH
charly17267  Offline
ELEVATOR TECH

Joined: Dec 2014
Posts: 7
I did that but the 4305 fault it's not clear and the controller have the red error light on

Attached Files
20210802_113527.jpg (41 downloads)
Last edited by charly17267; 08/02/21 03:36 PM.
#31532 - 08/03/21 12:51 AM Re: Schindler 3300 [Re: charly17267]  
Joined: Sep 2014
Posts: 153
BRG Offline
member
BRG  Offline
member

Joined: Sep 2014
Posts: 153
To reset the unintended movement the car has to be on hoistway access then go to menu 10 press enter go to 127 press enter make it a 1 and press enter. Some of the newer ones have a switch under the door bypass switches that can be slide in one direction to simulate hoistway access. Be sure to switch it back.

Last edited by BRG; 08/03/21 12:52 AM.
#31536 - 08/05/21 08:37 AM Re: Schindler 3300 [Re: charly17267]  
Joined: Aug 2019
Posts: 43
BOJAN Offline
newbie
BOJAN  Offline
newbie

Joined: Aug 2019
Posts: 43




Release elevator from blocked state by dedicated reset of
the tripped safety device.


To reset ucm fault
Hit enter
Number 10 will appear
Hit enter again, it will change to 101

Hit Up to change the 0 to 1
Hit enter
Reset SCPU
-:Car door safety contact opens at start
-:Verify the correct function of KTC, adjust KTC
accordingly.
Verify the correct installation of the doors and resolve any
issue found.

#31555 - 08/12/21 06:08 PM Re: Schindler 3300 [Re: charly17267]  
Joined: Dec 2014
Posts: 7
charly17267 Offline
ELEVATOR TECH
charly17267  Offline
ELEVATOR TECH

Joined: Dec 2014
Posts: 7
Thanks to the whole family for taking the time to help me.
The elevator it is working good 🙏🙏🙏👍👍👍


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.025s Queries: 16 (0.006s) Memory: 2.7010 MB (Peak: 2.8886 MB) Zlib disabled. Server Time: 2024-03-29 00:15:58 UTC