Who's Online Now
1 registered members (astepa), 17 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,643
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#31674 - 09/02/21 07:22 PM Kone kcm 831  
Joined: May 2017
Posts: 23
John. H Offline
stranger
John. H  Offline
stranger

Joined: May 2017
Posts: 23
Can anyone tell me where I can get a full set faults and descriptions. The book I have is incomplete goes to 99 then skips to 140 and stops at 213. I keep getting at 109 and247 fault thanks

#31684 - 09/03/21 02:52 AM Re: Kone kcm 831 [Re: John. H]  
Joined: Apr 2014
Posts: 263
heisenberg Offline
Engineer
heisenberg  Offline
Engineer

Joined: Apr 2014
Posts: 263
02 47=
Supervision for telephone line
communication.monitors the
dedicated
telephone line medium which is
provided for Emergency
communications
The dedicated
telephone line medium which is
provided for Emergency
communications is not OK

Visual Alarm:
HASG11: Output XFA6
Audible Alarm:
HASG11: Output XFA5

To fix=
Disconnect telephone
line connected in KRM board.

#31685 - 09/03/21 02:54 AM Re: Kone kcm 831 [Re: John. H]  
Joined: Apr 2014
Posts: 263
heisenberg Offline
Engineer
heisenberg  Offline
Engineer

Joined: Apr 2014
Posts: 263
0109= Drive position lost.

Drive has lost position Drive count differs more
than 300 mm at 30 or B30
vane edge
Synchronisation drive
request
Check the position
of 77:U/N and
61:U/N magnets.
Move lift when power is
off
01 09 38 08 DL Position lost LCEDRV bar pulse position is
incorrect
Bar pulse count differs
more than 100 mm at 30 or
B30 vane edge
Synchronisation drive
request
Pulse position is
recocered at 77
switch edge
Move lift when power off.

#31688 - 09/03/21 11:17 AM Re: Kone kcm 831 [Re: John. H]  
Joined: May 2017
Posts: 23
John. H Offline
stranger
John. H  Offline
stranger

Joined: May 2017
Posts: 23
Thanks so much!!! Any idea where I can get a copy of all the faults?

#31706 - 09/06/21 10:31 PM Re: Kone kcm 831 [Re: John. H]  
Joined: Apr 2017
Posts: 96
UpandDown2321 Offline
journeyman
UpandDown2321  Offline
journeyman

Joined: Apr 2017
Posts: 96
The faults in the range of 109s are drive specific faults you would need to identify the drive you're working on they won't always be the same faults and the subcodes would be different.


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.037s Queries: 15 (0.011s) Memory: 2.6763 MB (Peak: 2.8346 MB) Zlib disabled. Server Time: 2024-03-28 13:51:27 UTC