Who's Online Now
0 registered members (), 8 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,647
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#31742 - 09/13/21 06:52 PM Hydralic Tube Schedule 80  
Joined: Jul 2021
Posts: 11
Sun Offline
stranger
Sun  Offline
stranger

Joined: Jul 2021
Posts: 11
I am working on a Lula quote where the machine room is around 60 feet away from the Shaft.
I will be running a 3/4" pipe schedule 80 from the machine room to the shaft.
Does anyone had any experience running hydraulic pipe that far from the shaft?
Are there any issues doing it this way and any special precaution I need to take?

I unfortunately do not that the working pressure/Static pressure yet. It is a 3 floor system with 1400lb weight.

#31743 - 09/13/21 07:46 PM Re: Hydralic Tube Schedule 80 [Re: Sun]  
Joined: Jan 2015
Posts: 117
Turbo6 Offline
member
Turbo6  Offline
member

Joined: Jan 2015
Posts: 117
Chicago
That's not a long distance. Pascal's Law! Just minimize the elbows and properly mount pipe.

#31747 - 09/15/21 03:34 AM Re: Hydralic Tube Schedule 80 [Re: Sun]  
Joined: May 2011
Posts: 330
ABE Offline
Mechanic
ABE  Offline
Mechanic

Joined: May 2011
Posts: 330
I will say that if you have a long overhead pipe run with a car with a relatively low rise, I have seen issues with air getting trapped in the oil line. Some times it is necessary to add a extra bleeder somewhere in between the jack and pump unit.

#31751 - 09/16/21 01:01 PM Re: Hydralic Tube Schedule 80 [Re: Sun]  
Joined: Jul 2021
Posts: 11
Sun Offline
stranger
Sun  Offline
stranger

Joined: Jul 2021
Posts: 11
Thanks for the comments. I got some more accurate numbers

Capacity: 1400 lbs
Grossload: 3156 lbs
Travel: 183"3/4
Cylinder diameter: 4.5"
Plunger diameter: 3.54"
Working pressure: 620 psi


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.030s Queries: 15 (0.006s) Memory: 2.6683 MB (Peak: 2.8189 MB) Zlib disabled. Server Time: 2024-03-28 18:43:08 UTC