Otis 211

You are not logged in. [Log In] Home Forums Technical Questions Otis 211

0 registered members (), 12 guests, and 1 spider.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,495

Posts36,790

Members8,395

Most Online117
Jan 16th, 2020

Print Thread

#31781 - 09/20/21 04:36 PM Otis 211
Joined: Mar 2018 Posts: 11 Lav8rMEn stranger
Lav8rMEn stranger Joined: Mar 2018 Posts: 11	Simple question Meaning of BYOP fault. Also DLFB Last edited by Lav8rMEn; 09/20/21 04:50 PM.

#31827 - 09/27/21 09:43 AM Re: Otis 211 [Re: Lav8rMEn]
Joined: May 2019 Posts: 74 Hope&Poke journeyman
Hope&Poke journeyman Joined: May 2019 Posts: 74 Texas	Code requirement and bypass switch are "0" and one of the bypass inputs is high The Down leveling valve driver was on when it was not commanded on by software OR the down level valve driver was commanded on by software and no ooutput was seen at the DL output (Area 7).

#31872 - 10/07/21 06:28 PM Re: Otis 211 [Re: Lav8rMEn]
Joined: Nov 2018 Posts: 12 Dozer stranger
Dozer stranger Joined: Nov 2018 Posts: 12	You might have to replace your main IO board. Sometimes the hoistway and car door bypass switches go bad and it’ll give you this fault.

Photo Gallery

Page Time: 0.034s Queries: 15 (0.012s) Memory: 2.6596 MB (Peak: 2.8020 MB) Zlib disabled. Server Time: 2024-04-20 08:46:30 UTC