Who's Online Now
0 registered members (), 7 guests, and 1 spider.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,643
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#32533 - 02/14/22 12:48 PM Schlindler 3300 Two Speed doors  
Joined: Dec 2009
Posts: 534
solidstate Offline
addict
solidstate  Offline
addict

Joined: Dec 2009
Posts: 534

We have several of the 3300 two speed doors that the bolts have come loose on the Sync Cable assembly. The only way we have found to get the bolts and nuts back on, is to take the doors off. There are no access holes and it looks like they would have came up with a better solution to get the proper torque on the fasteners or used a different fastener type.

Checking to see if any one else is having the issue with the doors also, and better solutions to the issue.

#32556 - 02/17/22 03:42 PM Re: Schlindler 3300 Two Speed doors [Re: solidstate]  
Joined: Dec 2009
Posts: 534
solidstate Offline
addict
solidstate  Offline
addict

Joined: Dec 2009
Posts: 534
Nobody??

#32558 - 02/17/22 11:52 PM Re: Schlindler 3300 Two Speed doors [Re: solidstate]  
Joined: Feb 2018
Posts: 8
Meprom21 Offline
stranger
Meprom21  Offline
stranger

Joined: Feb 2018
Posts: 8
Thank our office smart engineer freinds across the pond for another wonderful design

#32559 - 02/18/22 03:34 AM Re: Schlindler 3300 Two Speed doors [Re: solidstate]  
Joined: Apr 2020
Posts: 389
Montana Offline
enthusiast
Montana  Offline
enthusiast

Joined: Apr 2020
Posts: 389
They are terrible doors, very lightweight. I have one on service that looks like the construction crew had to tack weld the entire fast and slow doors back together. The top floor hall doors would slightly scape at full open, we found the back hanger bolts loose. No adjustment. I predict a 5 - 10 year life span depending on usage and board/component availability.

#32560 - 02/18/22 06:07 AM Re: Schlindler 3300 Two Speed doors [Re: solidstate]  
Joined: Apr 2014
Posts: 263
heisenberg Offline
Engineer
heisenberg  Offline
Engineer

Joined: Apr 2014
Posts: 263
Is this the fermator doors?

#32561 - 02/18/22 01:02 PM Re: Schlindler 3300 Two Speed doors [Re: solidstate]  
Joined: Dec 2009
Posts: 534
solidstate Offline
addict
solidstate  Offline
addict

Joined: Dec 2009
Posts: 534
Yes its the fermator doors.

I was hoping some one had ran into this before and came up with a better solution than taking the doors all the way off.

#32853 - 04/05/22 11:31 AM Re: Schlindler 3300 Two Speed doors [Re: solidstate]  
Joined: Dec 2009
Posts: 534
solidstate Offline
addict
solidstate  Offline
addict

Joined: Dec 2009
Posts: 534
Follow up on this one. Was not as bad as we thought. Just pop the doors are(which are light) and replace the fasteners. We went back with ny lock nuts.


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.103s Queries: 15 (0.074s) Memory: 2.6923 MB (Peak: 2.8685 MB) Zlib disabled. Server Time: 2024-03-28 14:35:58 UTC