|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics6,500
Posts36,811
Members8,457
|
Most Online117 Jan 16th, 2020
|
|
|
#32873 - 04/06/22 05:07 PM
Re: Kone LCE
[Re: Jluff]
|
Joined: Aug 2016
Posts: 752
Jluff
old hand
|
old hand
Joined: Aug 2016
Posts: 752
|
It’s not the ups. Changed 6-12 to 0. Won’t move on inspection or auto. Everything says ready then as soon as car gets drive up or down it faults F-1. 0026. Then eventually. 0106
Last edited by Jluff; 04/06/22 05:07 PM.
|
|
|
#32876 - 04/06/22 06:24 PM
Re: Kone LCE
[Re: Jluff]
|
Joined: Aug 2016
Posts: 752
Jluff
old hand
|
old hand
Joined: Aug 2016
Posts: 752
|
I did not get to the top of shaft yet. The car is down low. Inspection faults out also so I can’t move the car. Safety led stays lit during fault .. it accepts a call and gets an drive up led lit. Then faults out. 0126 sub code 2. 0. 3075 .... I Will be back tomorrow
Last edited by Jluff; 04/06/22 06:43 PM.
|
|
|
#32878 - 04/06/22 06:59 PM
Re: Kone LCE
[Re: Jluff]
|
Joined: Aug 2016
Posts: 752
Jluff
old hand
|
old hand
Joined: Aug 2016
Posts: 752
|
After the 0126. A 0106 will pop up. Inverter not ok. Braking resistor damaged Check tachometer and thermal switch connections
My brake relays look good
Last edited by Jluff; 04/06/22 07:14 PM.
|
|
|
#32885 - 04/06/22 11:28 PM
Re: Kone LCE
[Re: Jluff]
|
Joined: Aug 2016
Posts: 752
Jluff
old hand
|
old hand
Joined: Aug 2016
Posts: 752
|
Thanks dirt. So The entire drive needs to be replaced ?
Last edited by Jluff; 04/06/22 11:29 PM.
|
|
|
#32897 - 04/07/22 02:18 PM
Re: Kone LCE
[Re: Jluff]
|
Joined: Aug 2016
Posts: 752
Jluff
old hand
|
old hand
Joined: Aug 2016
Posts: 752
|
Oh. I thought the bcx (brake control board ) was part of the KDL 16s drive. Where is this module located. In the silver brake module unit on side of controller?
Last edited by Jluff; 04/07/22 02:21 PM.
|
|
|
#32991 - 04/18/22 01:36 PM
Re: Kone LCE
[Re: Jluff]
|
Joined: Aug 2016
Posts: 752
Jluff
old hand
|
old hand
Joined: Aug 2016
Posts: 752
|
The brake board was bad inside of drive... Repair shop fixed it and car is working. I did have to replace my car top 12v battery though. Next time have to disconnect it when power is off ..
Last edited by Jluff; 04/18/22 01:36 PM.
|
|
|
|
|
|
|