Who's Online Now
0 registered members (), 5 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
April
S M T W T F S
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,492
Posts36,766
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#34055 - 10/15/22 11:25 PM Schindler 3300 Strange 97 Fault Shutdown 9097  
Joined: Oct 2019
Posts: 14
Jeff Marmur Offline
Jeff Elevator
Jeff Marmur  Offline
Jeff Elevator

Joined: Oct 2019
Posts: 14
Good Day Everyone

I have a schindler 3300, maybe a year old now. I have a shutdown fault 1 fault 9097 and sitting in 97 mode. no prior faults, I have the error light on. Run light below the HMI button is on, and error below the hmi buttons is off. Car runs on inspection no problem and level back to the floors. Doors can open and close after reset, I have done the 101 1 reset with no luck getting the 97 mode cleared. Not sure what's going on. Pretty stumped at this point. I have my 4 snowflakes. Never had a 97 with only a 9097 error before. Looking for some help!

Thanks in advance!

#34215 - 11/10/22 01:35 PM Re: Schindler 3300 Strange 97 Fault Shutdown 9097 [Re: Jeff Marmur]  
Joined: Apr 2010
Posts: 218
Smitty Offline
bangyourheadhere
Smitty  Offline
bangyourheadhere

Joined: Apr 2010
Posts: 218
Annapolis Md.
That is just a persistent error status. Go into 501 and scroll through your errors listed there. You can clear the buffer entirely by doing a 505 reset (set to 1 etc). At least then you will have a recent list

#34315 - 12/04/22 03:49 AM Re: Schindler 3300 Strange 97 Fault Shutdown 9097 [Re: Jeff Marmur]  
Joined: May 2019
Posts: 74
Hope&Poke Offline
journeyman
Hope&Poke  Offline
journeyman

Joined: May 2019
Posts: 74
Texas
I concer


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.027s Queries: 15 (0.008s) Memory: 2.6601 MB (Peak: 2.8020 MB) Zlib disabled. Server Time: 2024-04-18 01:52:50 UTC