1 registered members (TheRealMikeO),
28
guests, and
1
spider. |
Key:
Admin,
Global Mod,
Mod
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics6,505
Posts36,832
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#34157 - 11/02/22 09:39 PM
Re: TAC32 6300PA6 to 6300PA4 not working
[Re: Indirtwetrust]
|
Joined: Sep 2022
Posts: 22
waglip
stranger
|
stranger
Joined: Sep 2022
Posts: 22
|
There aren’t different parameters but there are different acceptable ranges of some parameters. Those 2 boards aren’t technically compatible, PA3 and PA6 are the lighter duty boards and PA4 and PA7 are the heavier duty. It’s always best to just put a default profile in the board rather than downloading and uploading adjusted profiles. Thank you for the answer. I really apologize for the novice question, but where do I download the default profile for the PA4? This TAC-32 uses 115V AC 3-phase Motor Harmonic setup and I am using the IMS software. I will appreciate any help. Wlip
|
|
|
#34192 - 11/07/22 11:06 PM
Re: TAC32 6300PA6 to 6300PA4 not working
[Re: Indirtwetrust]
|
Joined: Sep 2022
Posts: 22
waglip
stranger
|
stranger
Joined: Sep 2022
Posts: 22
|
They’re in the installation of IMS. If you go to door Smart Fast then Transfer, click upload, then Default, then browse to the IMS folder (C:/programfiles(x86)/thyssen/IMS) they’re either in the Default folder where they should be or the Default folder will be inside Drawings. Pick the right profile and upload it. So, the file to transfer using hyperterminal or other ZMODEM capable PC terminal software, directly to the door board, is exactly the same (file) used to download (Transfer) using IMS to the same board? That make it easy. Now, is there any other PC software or application that allows me to edit/change that profile on the bench instead of IMS and board connected? Thank you.
|
|
|
|
|