Who's Online Now
1 registered members (gohana256), 13 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,654
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#34611 - 01/25/23 08:40 PM Kone KCM831 Emergency Brake Issue  
Joined: Oct 2022
Posts: 1
John521 Offline
stranger
John521  Offline
stranger

Joined: Oct 2022
Posts: 1
Was doing a 5 year inspection with 125% load in the car to do the brake test and the inspector picked the upper door lock during the down travel and after that the elevator won’t run in either direction on normal or inspection. I’m getting a 36 and a 130 fault. I tried to use the manual electric brake release to get the weight out. Apparently I have a bad UPS unit because it has no power to it. Can anyone give me another option to lower the elevator to get the weights off? Thanks!

#34613 - 01/26/23 01:25 AM Re: Kone KCM831 Emergency Brake Issue [Re: John521]  
Joined: Aug 2017
Posts: 416
EElevator Offline
addict
EElevator  Offline
addict

Joined: Aug 2017
Posts: 416
Did you pull the CO1 plug apart to enable the UPS power to the brakes? It should be a white two pin molex plug not on a board, but joining two loops of wire usually hanging to the right of the ADON board.

Why would the inspector go off and do that? Did yall ask him too? Crazy to me, inspectors I deal with may push a button or something if you need a third hand and ask but never interfere with a test.


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.026s Queries: 15 (0.006s) Memory: 2.6526 MB (Peak: 2.7863 MB) Zlib disabled. Server Time: 2024-03-29 01:40:11 UTC