I was trying to get an ADON learn done after replacing the DRV board. This car’s ADON had been stolen to keep the other one running . So the car was running on inspection then it stopped. I had no car comm LED. CCBN board had power and all LEDs, comm wires rang out, so I sent the board for repair. Got it back and I have car comm now but get this 64 fault every time I power up. Car won’t run on inspection or anything. I can manually pick the K637 relay on the CCBN with menu 5_11 and it works fine, both relay contacts ring out good. What really seems odd to me is when you cycle power it takes 10 or 15 seconds for car and shaft comm LEDs to come on, normal (same as the other car) but this fault comes up way before I actually get car comm. Almost seems like it’s just looking for the input too early. I don’t know, pretty stumped on this one.