0 registered members (),
14
guests, and
4
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums13
Topics6,525
Posts36,929
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#8781 - 10/25/13 07:42 PM
Kone Monospace V3F16L
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
Hi. I have a problem with a Kone Monospace drive V3F16L. When power (Main switch 400V) is applyed, all seems okay. The green led for V3f16l OK is lid. And no fault codes. But 20 seconds later fault 0026 appears. And the green led for V3F16L OK turns off. Elevator does not move, Have altså tryed inspection drive. Also here all look okay, but when button for drive up or Down is pressed, fault 0026 apears Again. And no light in green led. Can anyone tell me what to do now please ?
Axeltek.dk
|
|
|
#8792 - 10/26/13 06:50 AM
Re: Kone Monospace V3F16L
[Re: tony]
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
Thanks for answers. I have read the other topics about V3F16L. And all about blown BSM50 Igbt, drivers, tvs diodes, etc etc. But this is difrent. The Igbt is not blown, and the drivers and tvs diodes are all okay. Also, if it is the "normal" problem, with blown Igbt etc. I understand there is 0026 fault code AND two other codes. And NO light in the green led for V3F16L OK. Here is ONLY one fault code :0026. And the main fuses is not blown. Of course i know it can still be the drive that is broken. But i am looking for specefics about this paticular situation, as described. It seems communication with drive is okay, as green led is lid ?
Axeltek.dk
|
|
|
#8828 - 10/30/13 08:58 PM
Re: Kone Monospace V3F16L
[Re: kiwinightstalker]
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
Hi Again. Yes i understand 0026 is a fault with the V3F16L drive. But i want to repair the drive. and not just buy new one. As it is rather expensive. I found out that inside the drive are several signals to enable drive for the bsm50 igbt. One of these signals was had too low voltage. found one smd transistor with leakage. Which resultet in no enable signal for igbt. Now it is changed, and enable is okay. In few dayes drive will be mountet Again, to see if it is working. Does anyone have any adwice about what to do when it is mountet Again. It would be aprisiatet. Do i need to do any reset or programming of parameters etc ?
Axeltek.dk
|
|
|
#8836 - 10/31/13 07:28 AM
Re: Kone Monospace V3F16L
[Re: Dmhughes]
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
Hi Dave. Thanks. I will let you know how it goes. During the last years i repaired some of these 3F16l drives. With The "normal" problem. (Blown igbt erc etc) Found a way to make them last .They are all working fine today. But this drive had different fault, as explained. So we will see how it goes. Best regards from Denmark
Axeltek.dk
|
|
|
#8848 - 11/01/13 06:37 PM
Re: Kone Monospace V3F16L
[Re: Axel]
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
Hi. Promiced to say what happend. Today the drive var mountet. After the smd transistor was replaced. Now lift is working properly Again. The green led for V3F16L OK is lid Again. And no fault codes.
Axeltek.dk
|
|
|
#8874 - 11/04/13 08:27 PM
Re: Kone Monospace V3F16L
[Re: Axel]
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
If Anyone need repair of KONE drive V3F16L. I Offer to do so. Usually within 2-4 working dayes. Please email if interrested a@axeltek.dk
Axeltek.dk
|
|
|
#8883 - 11/05/13 07:49 AM
Re: Kone Monospace V3F16L
[Re: sccjr]
|
Joined: Sep 2013
Posts: 7
Axel
stranger
|
stranger
Joined: Sep 2013
Posts: 7
Denmark
|
This was a real trouble shoot. It was real problem. Thought this forum was for professionals, that help Each other with difficult problems. Also this site Encourage you to offer services and sales. Sayes so on The front page.
Axeltek.dk
|
|
|
#8950 - 11/10/13 11:03 PM
Re: Kone Monospace V3F16L
[Re: Jerry Sodan]
|
Joined: Nov 2013
Posts: 93
koneisland
journeyman
|
journeyman
Joined: Nov 2013
Posts: 93
|
Replace drive with updated KDL version which is much better than your V3F16L.
Last edited by koneisland; 11/10/13 11:04 PM.
|
|
|
|
|