Any ideas will help. Kone KCM831 showing the following fault F _ _ 2 then 0 0 2 6 on the CPU board (main board). Fault code in book says "drive not OK. " Troubleshooting manual states a drive board has reported a fault to the LCE CPU Board. Troubleshooting manual states that thermistor on a drive board is bad.....it says to unplug it. We have both unplugged it AND jumped it, still nothing.

Kone states there are drive faults and asked us to reference the drive fault codes / manual -- we have manual but there is no LCD or display on the drive.

The faults also don't even match the troubleshooting manual faults for this car.

1. Can one access the drive faults on the main board in the controller?
2. Through a sub-menu?
3. Any other ideas?