Dmhughes -- thanks for the response.
16L drive (or 16DL whatever). It doesn't have the V3FR25 (whatever, many have numbers transposed). WE have all types of elevators on service, but this is the only Kone. But we have taken care of it for years -- put in Adon boards, etc. We have the fault codes book and we are into the CPU menu....but we wondered how to access the drive faults menu. We went through the procedure but it won't let us do anything and we can't clear the 0026 fault. We are afraid the drive is gone, too..........and they don't sell drive components -- you have to buy the whole drive. Thanks so much again for your help and anything else you give us would be great. Is there a sub-menu for the drive? In other words, we have the basic faults book and troubleshooting and the drive faults book and troubleshooting, but we can't access the drive faults in the CPU -- nothing will get past the 0026. It says:
1. Unplug thermistor at XT1 on V3f25. We unplugged it but we don't have this drive
2. for KCM hydro (this is an MRL).
3. RS 100 Unplug connector XM28 on LCEMCU board.
We did all these -- nothing will clear this fault.
THanks again