I have a Wheel-O-Vator Destiny elevator that services 3 floors of the house. The power to the house was out for a while and now when I hit the call button the car does not move, all of the doors stay locked and the call button blinks 6 times.
I looked at the manual and the call button blinking 6 times indicates a:
Lower Terminal Limit Fault
Lower terminal limit activated.

I assume this means the car has moved too low in the shaft? When it was working the pump would kick in every hour because the car would slowly drift down, not sure if that is normal. How can I force it to move the car back up? There is a control panel with a lot of wires and a switch that says run/off/manual and a reset button. There is also what looks to me like some breaker switches. I can get a picture later if needed.