The profile doesn't always go through cleanly through IMS, supposed to use Hyperterminal. If you don't have the generic, it's worth throwing it in and see if there really is no software in it. If you have a UIT you can plug it in any UDC, very handy, and check what version is in it. If this is a TAC32 or you have some, it would be worth the effort to get the version 23 generic, it has a fix for intermittent shutdowns with "i serial comm" faults, they'll drive you crazy. The car is shut down, you have watchdog faults, limits don't show up in door diagnostics, open door smartfast and the table doesn't fill out and there is a 2064 or 3064 in door diagnostics. After a reset everything works fine for hours, days, weeks.