Park the car where the car and counterweight crossheads are even, and use the "set EQ midpoint" function on CADI or SMLCD.
Thats 129
Here is it for hydro
Hydro:
65 Hex(101 Dec): The normally open and normally closed contacts of JRECC (In Car Inspection switch ).
66 Hex(102 Dec): The normally open and normally closed contacts of JRH (Machine Room Inspection switch ).
67 Hex(103 Dec): Top of car UP or DOWN button pressed but JREC (top of car inspection switch) on AUTO.
68 Hex(104 Dec): ISKT6 is on, but RSK1 is off.
69 Hex(105 Dec): ISKT6 is off, but RSK1 is on.
6A Hex(106 Dec): ISKT6 is on, but RSK2 is off.
6B Hex(107 Dec): ISKT6 is on, but RSK2 in on.
6E Hex(110 Dec): The normally open and normally closed contacts of JREC (Top of Car Inspection switch ).
6F Hex(111 Dec): The normally open and normally closed contacts of JGB (car door bypass switch ).
70 Hex(112 Dec): The normally open and normally closed contacts of JLB (hoistway door bypass switch ).
71 Hex(113 Dec): The normally open and normally closed contacts of ACCESS_EN (ACCESS Enable switch in car station).
78 Hex(120 Dec): The LVL_ZONE relay is not going on and off when KLU and KLD go on and off.
