Load weigher is not hooked up. Has been that way since we took over the job 3 years ago. So no telling how long it has not been connected.


I will check the sensitivity of the optical readers. And yes a new floor table was ran.

I will check the DBG. It is unlikely that the rails have moved dus to the jumbo rails having a bracket every 6 feet but anything is possible.

I was able to convince my customer to purchase the World Tool. Looking at the manual for it, it definitely seems better than the junky KONESpares tool. The tool actually has you select what region you are working in, KONESpares just connects without any selections.

I will be headed back out there once the world tool comes in.

Once again thank yall for the guidance.