Dover DMC 1 - Door Operator Problem

You are not logged in. [Log In] Home Forums Technical Questions Dover DMC 1 - Door Operator Problem

1 registered members (solidstate), 6 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,521

Posts36,913

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#27337 - 07/05/19 02:08 AM Re: Dover DMC 1 - Door Operator Problem [Re: mondragong]
Joined: Dec 2015 Posts: 1,539 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,539 Local 18	So you have: P150 from the controller and 12v (10.75) from the power supply to door board? Do you have a watchdog LED on the door board? To get the watchdog, the board needs to see a resistance across the motor armature. Open armature = no WD.

Entire Thread
Subject	Posted By	Posted
Dover DMC 1 - Door Operator Problem	mondragong	07/04/19 02:19 PM
Re: Dover DMC 1 - Door Operator Problem	chicago	07/04/19 03:01 PM
Re: Dover DMC 1 - Door Operator Problem	chicago	07/04/19 03:04 PM
Re: Dover DMC 1 - Door Operator Problem	john jay	07/04/19 06:55 PM
Re: Dover DMC 1 - Door Operator Problem	Indirtwetrust	07/05/19 02:08 AM
Re: Dover DMC 1 - Door Operator Problem	mondragong	07/06/19 12:30 PM
Re: Dover DMC 1 - Door Operator Problem	john jay	07/06/19 07:58 PM
Re: Dover DMC 1 - Door Operator Problem	Jblack83	07/10/19 12:58 AM
Re: Dover DMC 1 - Door Operator Problem	djenergy	08/20/19 07:50 PM

Photo Gallery

Page Time: 0.030s Queries: 17 (0.008s) Memory: 2.7049 MB (Peak: 2.8024 MB) Zlib disabled. Server Time: 2024-05-09 20:56:15 UTC