Originally Posted by Scarz3
Hi all.

Been having problems with a couple of swift futura units.

Usually they run fine for anything between 1 hour to 3 days, and then they break down.
Usually getting faults 9 & 10, and usually crashes out on fault 18. Although other faults have been appearing.
Modules and contactors have been changed. DPP switches have been changed.
Drive, encoder, brake board have all been swapped with known working ones.

Also on our DPP switches we're reading between 3.0 and 3.4 volts on DPP2 depending on adjustments made and nothing seems to get it down to the correct voltage.

We just can't seem to get to the bottom of this.

Any help would be much appreciated.



We’re still having these issues!!

Intermittently the car will leave the floor in the down direction, move out of the magnet zone, stop, level back into the floor it just came from.
It will do this 3 times then time out on a 18 - DRIVE FAULT.

This can happen at any floor but always in the down direction.

Anyone have any further ideas? Many thanks