I am trying to change a set of belts on a Gen 2. The belts have been physically replaced and need to be relearned by the pulse unit. When I look at the data, I see that belts 1 and 2 have chords that are “out of tolerance. Chords 1-10 are 8 ohms. Chords 11 and 12 are 999.999. Belts 3-5 are all the same ohms which appears to be 8. I have nothing that tells me what the procedure to learn these are. Any advice? Thanks for all the help. I know of another unit that has been jumped out that I need to make right as well. If it’s installed it has to function or public safety is compromised!