Hi ,

Need some Good ideas !!!!!

Controller: idec izumi fa-2j plc controller

Traction, 6 stop.... copenhagen😊😊

Problem:

In position normal the elevator Burns 2 of the 3
Main fuses on the 3 phases that goes into the
Elevator control room (machine room)

No problems in position Manuel on top of cabin !!!!
I Can drive the elevator up and Down in position slow
Speed .... “the danish monteur position” !!!

Fuses Burns only when the High speed relay is activated
( in position “ normal”)

And i have replaced the High speed relay, but the elevator
Keeps on burning fuses


/shoemaker