Won't boot after replacing CPUA on TAC32

You are not logged in. [Log In] Home Forums Technical Questions Won't boot after replacing CPUA on TAC32

0 registered members (), 11 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,880

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#29903 - 09/11/20 01:50 PM Won't boot after replacing CPUA on TAC32
Joined: May 2019 Posts: 37 Elevator_Logic Elevator_Logic
Elevator_Logic Elevator_Logic Joined: May 2019 Posts: 37 USA	I just replaced a CPUA board on a Tac 32 Hydo. Now the LCD display is just black blocks. When I attempt to use the USB to upload the job file the STAT led keeps blinking rapidly

Entire Thread
Subject	Posted By	Posted
Won't boot after replacing CPUA on TAC32	Elevator_Logic	09/11/20 01:50 PM
Re: Won't boot after replacing CPUA on TAC32	wltr00	09/11/20 03:26 PM
Re: Won't boot after replacing CPUA on TAC32	Indirtwetrust	09/11/20 05:16 PM

Photo Gallery

Page Time: 0.031s Queries: 16 (0.007s) Memory: 2.6799 MB (Peak: 2.8022 MB) Zlib disabled. Server Time: 2024-05-04 09:02:21 UTC