Gen 2 Saftey chain open

You are not logged in. [Log In] Home Forums Technical Questions Gen 2 Saftey chain open

0 registered members (), 26 guests, and 3 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,509

Posts36,852

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#30480 - 01/13/21 02:56 PM Gen 2 Saftey chain open
Joined: Aug 2016 Posts: 755 Jluff old hand
Jluff old hand Joined: Aug 2016 Posts: 755	Was about to do a full load test on gen 2. Car was running normal. Put car on independent service and Put weights on car and it wouldn’t run. Took weights off the car and it ran to the top floor . It’s a two stop car. When it got to the top floor it shut down with Saftey chain open . And will not reset. It doesn’t seem to be the usual suspects as those inputs are active . The controller in hall station says car at floor 1. But it is at floor 2. Here is a list on the inputs in upper and lower case as indicated on service tool 2703 drive fault shutdown safe2 safe OS GTC PES ICES CSC PIN TCI NORM aud bak tak mup mdo rn3c ADS FDS BDS TDS AGS FGS LVL1 DZ LVL2 NTB ntt ET1 ET2 et3 et4 PR1 PR2 PRUP PRSC odz1 odz2 ucm dbd1 DBD2 cchk BTNR bten HTSD 30V mrst cbp 1bp art arb SPED spsc bf PVOK spdt solf iofl acof dcif dcof FC1 fc2 fc4 fc8 fc16 fc32 fc64 f128

Photo Gallery