2 speed car. Up direction works fine. Down direction I lose my DG going into leveling. On my print I show my DG coil in area 6, but when I go to the relay glossary, it shows the coil to be in area 6 and 7, and I do not have an area 7. If I force DG in car goes into leveling flawlessly. Im only seeing a few auxillarys in front of DG coil, UD n/o 3/4, 1A no 13/14, and a DG resistor and DG no 7/8. I have changed the contacts on each of those along with the resistor.

Is there a down direction timer I am missing? Controller wiring diagram shows RX9-3S7021C and RX1-2S7592J on the data tag. Closest prints I have are RX2-4S7021C. I have contacted UNITEC and they do not have my exact print, but refer me to the RX2 print I have. They also told me some more interesting info, as the serial number 33267 and sales number 653153 show this elevator to be installed in Canada. We are far from Canada. This is in a power plant in Central Texas.