Hello All,
I have a 3-Bank set of Dover Composites, 2 of them #1 and #3 are working fine, but Car #2 will answer a Hall call to the top floor, but will not open the doors. This elevator will answer a car call to the top floor and open the doors, but will not open the doors if it arrives at the top floor from a hall call. this car will arrive at the top floor and the hall call will stay latched( no arrival gong) until the car is put on cartop inspection.
This car acts normally at all other 5 landings(6 stop) when given a Hall Call/Car Call.
I've cleaned the floor bar for the Top/6th floor. I've inspected and cleaned TDL relay. The plunger switch is pretty flat for the 6th floor TDL contact, but I adjusted it for better contact at the 6th floor
I haven't adjusted any other plunger switches yet to make sure they are contacting the other 6th floor floor bar contacts.
UX,CX,CC relays were cleaned, but not replaced, but as i said before Car #2 is working fine at all other floors.
No other car will come to the top floor if Car #2 is there and the Hall Call is still latched..
What am I missing?
Any help is greatly appreciated!


I