This is the clients current cab. It will be replicated by the same fabricator. Same hoistway design but additional floor. I tried to push a LULA but no go on speed. Their current unit is 40fpm
Kone, TK wanted the hoistway reconstructed. Criteria options to get the job was 150 fpm equipment and leaving the hoistway dimension besides raising the pit which is not completed yet.

Attached Files
IMG_2573 1.jpg (209 downloads)
20220505_164312203_iOS.jpg (19 downloads)
20220505_135118658_iOS.jpg (17 downloads)
20220505_135108726_iOS.jpg (15 downloads)
20220505_135147021_iOS.jpg (16 downloads)
The better the effort, the better the result.