So I had to look at the 2019 codebook.. 2.14.4.2.2 requires car door interlocks only if the clearances in 2.5.1.5 aint met or the car is in an uneclosed hoistway. 2.5.1.5 says if the car sill to fascia panel is 5" or less your good. It sounds like nothings changed there. Most installs have fascia. Or some OEMs are intentionally using car door interlocks (KONE with AMD operators) to save money not putting fascia up. I'm very thankful, that would've been a pain in the rear with GAL operators