With the laptop,
Service, Door Diagnostics, command: Learn Travel
From close to fully open, learn travel seems to work fine.
When I click SAVE (to save to flash), I receive a message:
SAVE REQUIRES THE DOOR TO BE STOPPED - PREFERABLY ON DLC.
If I take the command from Learn Travel to something else, the door slams open since the travel counter stored on flash is higher than the learned.
It seems it never saved to flash the actual counter from travel.
The door was in fact stopped on DLC when I tried to save.
Is that message telling me that it will not save, and somehow I need to "stop" the door?
How I do it?
Thanks.