I'm trying to get a KONE ReSolve back from the dead. Showed up after the building regained power, after a blackout. The car was parked with the doors open, lights off (light switch in the on position, so they should be on). Only failt logged was 2301. I replaced the COB24 board with a brand new one from KONE Spares, as per the KONE procedure, except I did not throw the disconnect after doing the 5-7-1, I just disconnected the XM 13 connector to kill power to the main board. Powered back on, and then I had a 1409 fault. Did a 5-7-2, same method as described earlier, and 2301 came back...any ideas?