Got a car that faults out about once every 10 days. 94 fault xtra info 0000 0010 CDOOR contact was active with doors fully open. Gate switch not hanging up and it's a GAL style so the roller would kick it out if it was. Wiring to the CIO board looks good, no shorts. Replaced the door close limit reed switch just in case, door open limit is virtual off the LUST door drive. No issues with the operation of the door while onsite testing. Had an event where the SKD4 LED was flickering however SKD5 LED did not even though it'ss in series with SKD4. Car is a duplex, thinking about swapping the CRIPHNA board with the other car next time it goes down to see if I can move the problem before I throw more parts at it.

Anyone have this fault with the same xtra info and have a resolution?